ESX Partition Sizes

Useful article for VMWare ESX Host Partition Sizes

http://vmetc.com/2008/02/12/best-practices-for-esx-host-partitions/

Best Practices for ESX Host Partitions

Installing ESX is fast and simple. By default you could click through the installer GUI changing only your local time zone and end up with a stable, dependable host. However, there are some recommended partitioning best practices that should be followed in order to make sure you minimize possible future headaches and create a repeatable and scalable environment.

This post uses content from documents found in the VI Plan and Design Toolkit available to VMware partners. Logging on to Partner Central and accessing > Info Center > VAC > Services is how you find the various toolkits. It also should be pointed out that the partitioning information in this post is for ESX 3.x only, and is not applicable to ESX 3i, 2.x or previous versions.

When installing ESX you quickly reach the Partitioning Options screen. Select the “Recommended” radio button initially. You can then make changes from the Partitioning Disks screen which follows.

Primary Partition Changes

Best practices state that the following partitions should be made “Primary” partitions:

/boot

/

Swap

This can be accomplished by selecting each of the aforementioned partitions (one at a time) and clicking the “Edit” button. The configuration options for that partition/file system will be brought up. Select (turn on) the checkbox option near the bottom of the box labeled “Force to be a primary partition”. Do this for each of 3 file systems listed above, clicking “OK” after fixing each file system.

Create New Partitions

Following VMware best practices, it is best to dedicate entire partitions for the following directories:

/var

/tmp

/home

This can be accomplished by clicking New.

Follow the configurations from the following table, as the file system should reflect these sizes. Click Next when finished.

Local Storage Partitions

This table shows the service console partitions and sizes for each ESX Server host. Some of these recommended partition sizes are larger than the default values. The additional partitions and increased sizes will protect against the critical root partition getting filled up which can lead to issues. Note that this section does not apply for ESX Server 3i. Also, the following partition table uses less than 16 GB of space.